Agri-Guard Brush – Chaff Suppression, Spray Control & Harvest Protection

Key Features – Why This Brush is Ideal

• Durable & Long-Lasting: UV-stabilised bristles and tough LDPE backing ensure performance in outdoor conditions.

• Customisable Lengths: Continuous rolls up to 25m can be cut to suit any application, making it versatile for different equipment.

• Easy to Install: Drill through the top 10mm and fix with Tek screws or rivets every 150–200mm for a secure fit.

• Effective Suppression: Dense single line of bristles efficiently controls chaff, swarf, spray drift, and debris.

• Versatile Applications: Perfect for harvesting machinery, sprayers, and other agricultural equipment.

• Convenient Packaging: Available in 1m lengths, 10m or 25m coils for easy shipping, handling and storage.

Specifications

• Hard-wearing LDPE backing: 25mm high × 10mm thick

• Single line of heavy-duty UV-stabilised polypropylene bristles (0.012″ or 0.018″)

• Manufactured in continuous rolls up to 25m

• Backing can be drilled through the top 10mm without affecting tufting

Durable, High-Performance Construction

The Agri-Guard Brush is engineered for farmers, agribusiness operators, and equipment manufacturers seeking reliable debris, chaff, and spray management on harvesting and spraying machinery. Its hard-wearing LDPE backing provides a lightweight but robust base, while the single dense line of bristles delivers effective suppression and control for a variety of applications.

Premium UV-Stabilised Bristles

The bristles are made from heavy-duty UV-stabilised polypropylene, designed for outdoor conditions and long-lasting performance. This setup is ideal for controlling chaff, swarf, chemical spray drift, and other debris, keeping machinery cleaner and more efficient during operations.

Flexible Lengths & Easy Installation

The Agri-Guard Brush is manufactured in continuous rolls up to 25m, allowing you to cut the brush to your exact requirements. Single 1m lengths purchased in multiples will be shipped as a continuous roll, and larger boxes are available in 10m or 25m coils. Installation is straightforward: drill through the top 10mm of the backing and fix directly to your equipment using Tek screws or rivets every 150–200mm.

Versatile Applications

This brush is suitable for a wide range of applications, including:

• Chaff and swarf suppression during harvesting
• Spray direction and containment on agricultural machinery
• Protecting sensitive surfaces on farm equipment
• Outdoor durability for long-term performance in Australian conditions

Why Choose Busy Bee Brushware?

Manufactured in Australia with over 25 years of expertise, Busy Bee Brushware delivers quality, reliability, and fast turnaround. Our skilled team ensures each product meets strict standards and provides expert advice to help you select the right solution. Choosing Busy Bee means investing in Australian-made brushes built to perform every day on farms and in agribusiness.

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

ROCK OFF TOWING BRUSH KIT SUITABLE FOR SIDE FRAME RAIL MOUNTING UNDER YOUR CARAVAN OR CAMPER TRAILER

Heading into the Australian outback this holiday?  Discover ROCK OFF^®, the Australian-made stone guard solution. Built tough for Aussie outback conditions when the bitumen highways run out.

Your Side Frame Rail Mounting Kit is a new addition to the ROCK OFF^® Towing Brush Strip range of products. In addition to the Towing Brush Strip, this kit includes a stainless steel fabricated mounting rail and stainless steel fitting to install under your caravan or camper trailer, or at the back of your vehicle*.

ROCK OFF^® Towing Brush Strip Key Features:

• Helps prevent rock and stone kick-up from vehicle wheels, protecting the front of your caravan, camper trailer, boat or other towed vehicle
• Great for helping to protect your pipework, suspension, tanks and spare tyre under your caravan or camper trailer when travelling on the rugged open roads of the Aussie outback
• Your mounting options include under the A-Frame of your towing vehicle, at the front of your towing vehicle, or behind the wheels of your towing vehicle
• Cut into smaller lengths for easy fitting
• Can be mounted under your Vehicle in certain conditions

Now available in four convenient kit lengths:

• 1500mm (Stainless Steel Rail will measure 1200mm)
• 1750mm (Stainless Steel Rail will measure 1600mm)
• 1850mm (Stainless Steel Rail will measure 1600mm)
• 1950mm (Stainless Steel Rail will measure 1600mm)
• 2400mm (Stainless Steel Rail will measure 2200mm)

(Other sizes available as Special Order, please Contact Us for more detail)

How to order the correct kit length:

• Measure your vehicle from outside tyre to outside tyre

Available bristle lengths:

1. 150mm (suits mounting height of 295mm or more)
2. 200mm suits mounting height of 345mm or more)
3. 250mm (suits mounting height of 395mm or more)
4. 300mm (suits mounting height of 445mm or more)
5. 350mm (suits mounting height of 495mm or more)
6. 400mm (suits mounting height of 545mm or more)

How to determine your ideal bristle length:

1. Your bristle length should be at least 145mm shorter than the distance from the top of your mounting point to the road when fully loaded
2. Measure the distance between the top of the mounting point on your vehicle, caravan or trailer, and the road
3. Deduct at least 100mm for road clearance and a further 45mm for the brush backing, total 145mm
4. For example, if your total distance from mounting point to the road surface is 400mm, then you will need a bristle length of 250mm, and your clearance to the road would be 105mm

OFFER – 10% DISCOUNT OFF YOUR ROCK OFF ® Towing Brush Strip Mounting Kit – LIMITED TIME ONLY

Your kit comes with:

• 1 x ROCK OFF® Towing Brush Strip (max. width 2400mm, can be cut to your desired overall vehicle or caravan/trailer width)
• 1 x Stainless Steel Mounting Rail 1600mm (1200mm for Kit length of 1500mm, 2000mm for Kit length of 2200mm & 2200mm for Kit length of 2400mm)
• 2 x 2.5mm thick Stainless Steel Side Mounts to fit under your towing vehicle
• Fittings include:
  • 10 x Pan-head Self-Tapping Screws (to fit Rails to Brush)
  • 4 x M12 Button head Cap Screws
  • 4 x M12 Nyloc Nuts
  • 8 x Nyloc Washers (to fit Side Mounts to Rails)

EXHAUST KIT OPTIONS AVAILABLE NOW

NOTE: ROCK OFF^® Towing Brush Strip is a Polypropylene (plastic) construction and must be mounted well clear of your exhaust pipe to avoid damage. Heat from the exhaust pipe and hot fumes can distort the bristles.

For best results, mount the brush under the your exhaust or behind the exhaust.

Have an exhaust pipe in the way? Check out these solutions:

Straight exhaust pipes:

Straight pipes are ideal and do not typically require an Exhaust Kit option. This applies to straight exhaust pipes either above the brush mounting area or side pipes facing away from the mounting.

Angled exhaust pipes (within 150mm of brush mounting are):

When your pipes are angled downwards and within 150mm of the brush mounting area, choose our Exhaust Shield Plate.  This fitting has stainless steel open shield plate to be fitted in front of your exhaust pipe so exhaust heat and fumes are drawn into the open area and away from your vehicle. Towing Brush Strip bristles are individually stapled and can be removed with pliers to accommodate fitting the Exhaust Shield Plate over the Stainless Steel Rails and in front of your exhaust pipe. Your Exhaust Shield Plate is fitted with a smaller piece of Towing Brush Strip to cover the gap under the plate.

Angled Exhaust Pipes (150-500mm from brush mounting area):

Further, if your exhaust pipes angled downwards and located between 150mm and 500mm (max) away from the brush mounting area, choose our Exhaust Extension Kit. The Exhaust Extension Kit includes Exhaust Shield Plate plus 500mm of Stainless Steel Truck Flex Tube in sizes 2.5″ (60mm) or 3″ (76mm). Truck Flex Tube allows fitting over your exhaust pipe with exit via the opening in the Exhaust Shield Plate. Also includes a coupling to fit over your exhaust pipe, and a stainless steel fitting to keep Flex Tube in place. This allows exhaust gases to flow away from under vehicle and not impact Towing Brush.

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

Checkout our Installation video for Exhaust fitting here

See our ROCK OFF Towing Brush Strip in action here

*Disclaimer: It is your responsibility to ensure this product is suitable for fitment and use with your intended towbar and vehicle (vehicle includes Caravans, Trailers, Motorhomes).  

ROCK OFF^® CARAVAN STONE GUARD BRUSH KIT SUITABLE FOR FLAT MOUNTING UNDER YOUR CARAVAN OR CAMPER TRAILER

Heading into the Australian outback this holiday?  Discover ROCK OFF^®, the Australian-made stone guard solution. Built tough for Aussie outback conditions when the bitumen highways run out.

Your Flat Mounting Kit is a new addition to the ROCK OFF^® Towing Brush Strip range of products. In addition to the Towing Brush Strip, this kit includes a stainless steel fabricated mounting rail and stainless steel fitting to install under your caravan or camper trailer, or at the back of your vehicle*.

ROCK OFF^® Towing Brush Strip Key Features:

• Helps to prevent rock and stone kick-up from vehicle wheels, protecting the front of your caravan, camper trailer, boat or other towed vehicle
• Great for helping to protect your pipework, suspension, tanks and spare tyre under your caravan or camper trailer when travelling on the rugged open roads of the Aussie outback
• Mounting options include under the A-Frame of your towing vehicle, at the front of your towing vehicle, or behind the wheels of your towing vehicle
• Cut into smaller lengths for easy fitting
• Can be mounted under your Vehicle in certain conditions

Now available in four convenient kit lengths:

• 1500mm (Stainless Steel Rail will measure 1200mm)
• 1750mm (Stainless Steel Rail will measure 1600mm)
• 1850mm (Stainless Steel Rail will measure 1600mm)
• 1950mm (Stainless Steel Rail will measure 1600mm)
• 2200mm (Stainless Steel Rail will measure 2000mm)
• 2400mm (Stainless Steel Rail will measure 2200mm)

(Other sizes available as Special Order, please Contact Us for more detail)

How to order the correct kit length:

• Measure your vehicle from outside wheel to outside wheel

Available bristle lengths:

1. 150mm (suits mounting height of 295mm or more)
2. 200mm (suits mounting height of 345mm or more)
3. 250mm (suits mounting height of 395mm or more)
4. 300mm (suits mounting height of 445mm or more)
5. 350mm (suits mounting height of 495mm or more)
6. 400mm (suits mounting height of 545mm or more)

How to determine your ideal bristle length:

1. Your bristle length should be at least 145mm shorter than the distance from the top of your mounting point to the road when fully loaded
2. Measure the distance between the top of the mounting point on your vehicle, caravan or trailer, and the road
3. Then deduct at least 100mm for road clearance and a further 45mm for the brush backing, total 145mm
4. For example, if your total distance from mounting point to the road surface is 400mm, then you will need a bristle length of 250mm, and your clearance to the road would be 105mm

OFFER – 10% DISCOUNT OFF YOUR ROCK OFF ® Towing Brush Strip Mounting Kit – LIMITED TIME ONLY

Your kit comes with:

• 1 x ROCK OFF® Towing Brush Strip (max. width 2400mm, can be cut to your desired overall vehicle or caravan/trailer width)
• 1 x Stainless Steel Mounting Rail 1600mm (2300mm for Kit length of 2400mm)
• 2 x Flat Mounts to fit under your towing vehicle
• Fittings include:
  • 10 x Pan-head Self-Tapping Screws (to fit Rails to Brush)
  • 4 x M12 Button head Cap Screws
  • 4 x M12 Nyloc Nuts
  • 8 x Nyloc Washers (to fit your Flat Mounts to Rails)

EXHAUST KIT OPTIONS AVAILABLE NOW

NOTE: ROCK OFF^® Towing Brush Strip is a Polypropylene (plastic) construction and must be mounted well clear of your exhaust pipe to avoid damage. Heat from the exhaust pipe and hot fumes can distort the bristles.

For best results, mount the brush under the exhaust or behind the exhaust.

Have an exhaust pipe in the way? Check out these solutions:

Straight exhaust pipes:

Straight pipes are ideal and do not typically require an Exhaust Kit option. This applies to straight exhaust pipes either above the brush mounting area or side pipes facing away from the mounting.

Angled exhaust pipes (within 150mm of brush mounting are):

When your pipes are angled downwards and within 150mm of the brush mounting area, choose our Exhaust Shield Plate.  This fitting has stainless steel open shield plate to be fitted in front of your exhaust pipe so exhaust heat and fumes are drawn into the open area and away from your vehicle. Towing Brush Strip bristles are individually stapled and can be removed with pliers to accommodate fitting the Exhaust Shield Plate over the Stainless Steel Rails and in front of your exhaust pipe. Exhaust Shield Plate is fitted with a smaller piece of Towing Brush Strip to cover the gap under the plate.

Angled Exhaust Pipes (150-500mm from brush mounting area):

Further, for exhaust pipes angled downwards and located between 150mm and 500mm (max) away from the brush mounting area, choose our Exhaust Extension Kit. The Exhaust Extension Kit includes Exhaust Shield Plate plus 500mm of Stainless Steel Truck Flex Tube in sizes 2.5″ (60mm) or 3″ (76mm). Truck Flex Tube allows fitting over your exhaust pipe with exit via the opening in the Exhaust Shield Plate. Also includes a coupling to fit over your exhaust pipe, and a stainless steel fitting to keep Flex Tube in place. This allows the exhaust gases to flow away from under the vehicle and not impact the Towing Brush.

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

Checkout our Installation video for Exhaust fitting here

See our ROCK OFF Towing Brush Strip in action here

*Disclaimer: It is your responsibility to ensure this product is suitable for fitment and use with your intended towbar and vehicle (vehicle includes Caravans, Trailers, Motorhomes).  

ROCK OFF TOWING BRUSH KIT – includes Stainless Steel Rail (mounting bracket not included).

Heading into the Australian outback this holiday?  Discover ROCK OFF^®, the Australian-made stone guard solution. Built tough for Aussie outback conditions when the bitumen highways run out.

The Mounting Rail is a new addition to the ROCK OFF^® Towing Brush Strip range of products. This includes your Towing Brush Strip and a stainless steel fabricated mounting rail.  Install on the rear of your vehicle, or under your caravan or camper trailer. (Mounting Bracket is NOT included, refer our other Kits).

This is a DIY installation.

There is no “one size fits all” solution.  You will need to source an appropriate metal fitting bracket based on your own towing vehicle.

ROCK OFF^® Towing Brush Strip Key Features:

Your goods comes with:

• 1 x ROCK OFF® Towing Brush Strip. (max. width 2400mm, can be cut to your desired overall vehicle or caravan/trailer width)
• 1 x Stainless Steel Mounting Rail made from 1.5mm 304 Stainless Steel, internal dimensions 45mm x 25mm, external dimensions 46.6mm x 25.25mm +/-.
• Rail Length  1200mm for vehicle width 1500
• Rail Length 1600mm for vehicle width 1750/1850/1950
• Rail Length 2000mm for caravan width 2200
• Rail Length 2200mm for caravan width 2400mm (Please contact us if you require a longer length Rail)
• Fittings include:
  • 15 x Pan-head Self-Tapping Screws (to fit Rail to Brush)

Why choose ROCK OFF^® Towing Brush Strip:

• Helps to prevent rock and stone kick-up from your vehicle wheels.  Protect the front of your caravan, camper trailer, boat or other towed vehicle
• Minimises rock bounce-back, protecting against damage to the rear window of your vehicle
• Great for helping to protect your pipework, suspension, tanks and spare tyre under your caravan or camper trailer. Particularly when travelling on the rugged open roads of the Aussie outback.

1.How to order the correct kit length:

• Measure your vehicle from outside wheel to outside wheel

ROCK OFF^® can be used in conjunction with most common caravan/trailer chains and electrical fittings.  This allows you to maintain full brush coverage across the entire width of your towing vehicle.

• 1500mm – suitable for Vehicles and caravans
• 1750mm – suitable for vehicles like Mitsubishi Triton Ute
• 1850mm – suitable for vehicles like Mazda BT50, Ford Ranger, Toyota Prado
• 1950mm – suitable for vehicles like Toyota Landcruiser Series 200
• 2200mm – suitable for Dodge RAM or under caravan protection
• 2400mm – suitable for under caravan protection

(Other sizes available as Special Order, please Contact Us for more detail)

2.How to determine your ideal bristle length:

• Always measure when your vehicle is fully loaded
• Your bristle length should be at least 150mm shorter than the distance from the top of your mounting point to the road
• Measure the distance between the top of the mounting point on your vehicle and the road
• Deduct at least 100mm for road clearance, and a further 50mm for the brush backing and rails. That totals 150mm
• For example, if your total distance from mounting point to the road surface is 400mm, then you will need a bristle length of 250mm
• TIP – you are better to use spacers or packers to drop the brush down. This will be easier than to purchase a longer bristle length and try to trim the bristle!!)

Available bristle lengths:

• 150mm (suits mounting height of 300mm or more)
• 200mm (suits mounting height of 350mm or more)
• 250mm (suits mounting height of 400mm or more)
• 300mm (suits mounting height of 450mm or more)
• 350mm (suits mounting height of 500mm or more)
• 400mm (suits mounting height of 550mm or more)

3.Fit to your vehicle or caravan or motor home

• Mounting bracket is not included with this Product listing.  This product is ROCK OFF Towing Brush and Stainless Steel Rail only.
• Please refer to our product listings for our other options.  Check out our Hitch Mount Brush Kit; U-Bolt Brush Kit; Flat Mount Brush Kit; Side/Frame Rails Mount Brush Kit.
• Our Stainless Steel Rails have drill holes across the length of the Rail.  You can drill through the backing of the ROCK OFF Towing Brush to bolt the Brush to your own mounting bracket.

OFFER – 10% DISCOUNT OFF YOUR ROCK OFF ® Towing Brush Strip BRUSH AND RAIL – LIMITED TIME ONLY

EXHAUST KIT OPTIONS AVAILABLE NOW

NOTE: ROCK OFF^® Towing Brush Strip is a Polypropylene (plastic) construction. Your brush must be mounted well clear of your exhaust pipe to avoid damage. Heat from the exhaust pipe and hot fumes can distort the bristles.

For best results, mount the brush under the exhaust or behind the exhaust. Please also consider converting your exhaust to side pipes to ensure full clearance of exhaust fumes away from the vehicle.

Have an exhaust pipe in the way? Check out these solutions:

Straight exhaust pipes:

Straight pipes are ideal and do not typically require an Exhaust Kit option. This applies to straight exhaust pipes either above the brush mounting area, or for side pipes facing away from the mounting.

Angled exhaust pipes (within 150mm of brush mounting are):

For pipes angled downwards and within 150mm of the brush mounting area, choose our Exhaust Shield Plate.  This fitting has a stainless steel open shield plate to be fitted in front of your exhaust pipe. Then exhaust heat and fumes are drawn into the open area and away from your vehicle. Your Towing Brush Strip bristles are individually stapled. This means individual tufts can be removed with pliers to accommodate fitting. The Exhaust Shield Plate fits over the Stainless Steel Rails and in front of your exhaust pipe. Your Exhaust Shield Plate is fitted with a smaller piece of Towing Brush Strip to cover the gap under the plate.

Angled Exhaust Pipes (150-500mm from brush mounting area):

For exhaust pipes angled downwards and located between 150mm and 500mm (max) away from the brush mounting area, choose the Exhaust Extension Kit. Your Exhaust Extension Kit includes an Exhaust Shield Plate plus 500mm of Stainless Steel Truck Flex Tube. Available in sizes 2.5″ (60mm) or 3″ (76mm). The truck Flex Tube fits over your exhaust pipe and exits through the opening in the Exhaust Shield Plate.  The Kit also includes a coupling to fit over your exhaust pipe if required. This allows the exhaust gases to flow away from under your vehicle and not impact the Towing Brush.

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

Checkout our Installation video for Exhaust fitting here

See our ROCK OFF Towing Brush Strip in action here

Disclaimer: It is your responsibility to ensure this product is suitable for fitment and use with your intended towbar and vehicle (vehicle includes Caravans, Trailers, Motorhomes).  

ROCK OFF^® TOWING BRUSH KIT SUITABLE FOR U BOLT MOUNTING

(U Bolt not included, but readily sourced from your local hardware store)

Heading into the Australian outback this holiday?  Discover ROCK OFF^®, the Australian-made stone guard solution. Built tough for Aussie outback conditions when the bitumen highways run out.

The U Bolt Mounting Kit is a new addition to the ROCK OFF^® Towing Brush Strip range of products. In addition to the Towing Brush Strip, this kit includes a stainless steel fabricated mounting rail and stainless steel fitting to install on the rear of your vehicle, or under your caravan or camper trailer. Please note, U Bolt is not included.  Suitable to mount on the towing bar of your Ford Ranger or Mitsubishi Triton.

ROCK OFF^® Towing Brush Strip Key Features:

• Helps to prevent rock and stone kick-up from vehicle wheels, protecting the front of your caravan, camper trailer, boat or other towed vehicle
• Minimises rock bounce-back, protecting against damage to the rear window of your vehicle
• Great for helping to protect your pipework, suspension, tanks and spare tyre under your caravan or camper trailer when travelling on the rugged open roads of the Aussie outback

Available in three convenient kit lengths:

• 1500mm (Stainless Steel Rail will measure 1200mm)
• 1750mm (Stainless Steel Rail will measure 1600mm)
• 1850mm (Stainless Steel Rail will measure 1600mm)
• 1950mm (Stainless Steel Rail will measure 1600mm)
• 2200mm (Stainless Steel Rail will measure 2000mm)
• 2400mm (Stainless Steel Rail will measure 1600mm)

(Other sizes available as Special Order, please Contact Us for more detail)

How to order the correct kit length:

• Measure your vehicle from outside wheel to outside wheel

ROCK OFF^® can be used in conjunction with most common caravan/trailer chains and electrical fittings, allowing you to maintain full brush coverage across the entire width of your towing vehicle.

Available bristle lengths:

1. 150mm (suits mounting height of 295mm or more)
2. 200mm (suits mounting height of 345mm or more)
3. 250mm (suits mounting height of 395mm or more)
4. 300mm (suits mounting height of 445mm or more)
5. 350mm (suits mounting height of 495mm or more)
6. 400mm (suits mounting height of 545mm or more)

How to determine your ideal bristle length:

1. Your bristle length should be at least 145mm shorter than the distance from the top of your mounting point to the road when fully loaded
2. Measure the distance between the top of the mounting point on your vehicle, caravan or trailer, and the road
3. Deduct at least 100mm for road clearance and a further 45mm for the brush backing, total 145mm
4. For example, if your total distance from mounting point to the road surface is 400mm, then you will need a bristle length of 250mm, and your clearance to the road would be 105mm

U Bolt mounts can accommodate U Bolts up to an outside width of 130mm.

OFFER – 10% DISCOUNT OFF YOUR ROCK OFF ® Towing Brush Strip Mounting Kit – LIMITED TIME ONLY

Your kit comes with:

• 1 x ROCK OFF® Towing Brush Strip (max. width 2400mm, can be cut to your desired overall vehicle or caravan/trailer width)
• 1 x Stainless Steel Mounting Rail 1600mm (2000mm for Kit length of 2200mm & 2200mm for Kit length of 2400mm)
• 2 x U Bolt Mounts with slots to fit up to 130mm width U Bolts (Note: U Bolts not included)
• Fittings include:
  • 16 x Pan-head Self-Tapping Screws (to fit Rails to Brush)
  • 4 x M12 Button head Cap Screws
  • 4 x M12 Nyloc Nuts
  • 8 x Nyloc Washers (to fit U Bolt Mounts to Rails)
  • 1x set of Packers (complementary)

EXHAUST KIT OPTIONS AVAILABLE NOW

NOTE: ROCK OFF^® Towing Brush Strip is a Polypropylene (plastic) construction and must be mounted well clear of your exhaust pipe to avoid damage. Heat from the exhaust pipe and hot fumes can distort the bristles.

For best results, mount the brush under the exhaust or behind the exhaust.

Have an exhaust pipe in the way? Check out these solutions:

Straight exhaust pipes:

Straight pipes are ideal and do not typically require an Exhaust Kit option. This applies to straight exhaust pipes either above the brush mounting area or side pipes facing away from the mounting.

Angled exhaust pipes (within 150mm of brush mounting are):

When your pipes are angled downwards and within 150mm of the brush mounting area, choose our Exhaust Shield Plate.  This fitting has stainless steel open shield plate to be fitted in front of your exhaust pipe so exhaust heat and fumes are drawn into the open area and away from your vehicle. Towing Brush Strip bristles are individually stapled and can be removed with pliers to accommodate fitting the Exhaust Shield Plate over the Stainless Steel Rails and in front of your exhaust pipe. Your Exhaust Shield Plate is fitted with a smaller piece of Towing Brush Strip to cover the gap under the plate.

Angled Exhaust Pipes (150-500mm from brush mounting area):

Further, if your exhaust pipes angled downwards and located between 150mm and 500mm (max) away from the brush mounting area, choose our Exhaust Extension Kit. The Exhaust Extension Kit includes Exhaust Shield Plate plus 500mm of Stainless Steel Truck Flex Tube in sizes 2.5″ (60mm) or 3″ (76mm). Truck Flex Tube allows fitting over your exhaust pipe with exit via the opening in the Exhaust Shield Plate. Also includes a coupling to fit over your exhaust pipe, and a stainless steel fitting to keep Flex Tube in place. This allows exhaust gases to flow away from under vehicle and not impact Towing Brush.

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

Checkout our Installation video for Exhaust fitting here

See our ROCK OFF Towing Brush Strip in action here

Disclaimer: It is your responsibility to ensure this product is suitable for fitment and use with your intended towbar and vehicle (vehicle includes Caravans, Trailers, Motorhomes).  

GARAGE DOOR STRIP BRUSH – TOP AND SIDE SEALS

UPDATE – Australian Standards AS 3959-2018 Construction of buildings in bushfire-prone areas – we have confirmed via independent testing our Fire Retardant Strip Brush meets the requirements for homes in BAL rated zones 12.5 up to and including BAL FZ. 

Protect your home from bush fire Ember Attack with our Fire Retardant Garage Brush Seals.  Complies with AS 3959-2018 for BAL – Bush fire attack levels 12.5, 19, 29, 40 and FZ.

Easy to DIY install to or around your Garage Door to seal up gaps to 2mm as per AS 3959-2018 Construction of buildings in bushfire-prone areas.

Suitable to help protect from dust, leaves, draughts, birds and insects.  Helps to keep your garage, home workshop or mancave cooler in summer and warmer in winter.

TOP SEAL

2 options available:

Option A45 – 45 degree Holder – For mounting under the Lintel (or frame), with the bristle just touching the Garage Door when closed.  Can be mounted with the bristle angled upward or downward depending on the movement of your garage door. Suitable for your Roller Door, Sectional or Panel Door.

Option B25 – 25 degree Holder – (SUITABLE FOR GARAGE ROLLER DOORS ONLY) For mounting directly to the outside of the Garage Door.  Fit onto the outer corrugation so that the channel and Brush Strip sits neatly into an inner corrugation.  The Brush Strip rolls up neatly with the Roller Door.  Unfolds when the Roller Door closes and the bristle settles behind the Lintel to create the seal.

SIDE SEAL

For Ember Seal Side Seals we recommend you consider fixing the brush strip to the front of the garage door surround, on the outside of the opening.  The 45 degree Angle Aluminium Holder and 25mm bristle may help reduce the impact of a potential ember attack by acting as a barrier to entry into your garage.  The Roller Door Guides then might protect as a 2nd line of defence. Small particles may be repelled from the Strip Brush Seal fitted to the front of the Garage Door.

Single Garage Kit –

Our Kit covers garage doors up to 3000mm wide and 3000mm wide.

Option S50 – Covers up to a 50mm gap

Option S75 – Covers up to a 75mm gap

Top Seal Contains:

• 2 x 1500mm Anodized Aluminium Holder with 45-degree or 25-degree profile
• 2 x 1500mm Fire Retardant Strip Brush in 4mm ZincSeal backing with 50mm, or 75mm Nylon bristle length
• Fixings – 10 x Steel Screws

Side Seals Contains:

• 4 x 1500mm Anodized Aluminium Holder with 45-degree profile
• 4 x 1500mm Nylon66 Strip Brush in 4mm ZincSeal backing with 25mm Bristle Length
• Fixings – 20 x Masonry Screws

Double Garage Kit –

Our Kit covers garage doors up to 6000mm wide and 3000mm wide.

Option D50 – Covers up to a 50mm gap

Option D75 – Covers up to a 75mm gap

Top Seals Contains:

• 4 x 1500mm Anodized Aluminium Holder with 45-degree or 25-degree profile
• 4 x 1500mm Fire Retardant Strip Brush in 4mm ZincSeal backing with 50mm or 75mm bristle length
• Fixings – 20 x Steel Screws

Side Seals Contains:

• 4 x 1500mm Anodized Aluminium Holder with 45-degree profile
• 4 x 1500mm Fire Retardant Strip Brush in 4mm ZincSeal backing with 25mm Bristle Length
• Fixings – 20 x Masonry Screws

NB. FOR GAPS LARGER THAN 75mm WE RECOMMEND OUR 9MM INDUSTRIAL STRIP BRUSH OPTIONS.  You may also need to consult with your local Garage Door Service professional who may be able to adjust the door to reduce the size of the gap.

• Designed and made in Australia, and has the seal of the Australian Made Campaign licence
• Larger 4mm backing thickness which provides a fuller and dense coverage
• Easy to install to your Garage Door to stop dust, leaves and insects flying in over the top of the Roller Door
• Anodized Aluminium Holders can be painted with an Etch Primer and Colorbond colours to match your Garage Door
• Can be mounted using Steel Screws or Rivets, and Masonry Screws for mounting Side Seals to brickwork
• If there are corrugations in your Roller Door, the bristle needs to touch the outer corrugation of the door to create the seal
• Check that the brush mounting will not impact the mechanism of the Garage Door
• If unsure, talk to your local Garage Door maintenance professional, or your Building Construction Consultant
• Heavy duty packaging to handle shipping to all parts of Australia

See our other product listings. We have Kits available for Sectional and Panel Lift Doors (Type “Sectional” in our Search Box), or you can mix and match with our “Choose your options” product listing (type “4mm” in our Search Box). Sample Kits are available to purchase so you can “try before you buy”

We have a full range of Aluminium Holders and Nylon66 Brush Strips suitable for most domestic Garage doors, including Roller Doors, Panel Doors, Tilt Doors and Sectional Doors.  Suitable for top and bottom seal, and side seals.

Also available in 9mm backing thickness for larger or more Industrial applications.  Refer to our Product Brochure for Brush and Holder sizes.

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

Australia Post Shipping Is NOT available for lengths above 1 metre. Australia-Wide Flat Rate shipping available.

Please supply a physical address and contact number as our couriers cannot deliver to a PO Box.   Please also specify any special instructions for our Courier, eg. leave at side door if not at home.  Thank you.

GARAGE DOOR STRIP BRUSH – TOP AND SIDE SEALS

Keep the elements out of your Residential Garage, with our Australian Made Strip Brush and Garage Door Seals.  Manufactured and stocked in Australia.  Suitable for your Garage Roller Door, Sectional or Panel Door.

Suitable to help protect from dust, leaves, draughts, birds and insects.  Helps to keep your garage, home workshop or mancave cooler in summer and warmer in winter.

TOP SEAL

2 options available:

Option A45 – 45 degree Holder – For mounting under the Lintel (or frame), with the bristle just touching the Garage Door when closed.  Can be mounted with the bristle angled upward or downward depending on the movement of your garage door. Suitable for your Roller Door, Sectional or Panel Door.

Option B25 – 25 degree Holder – (SUITABLE FOR GARAGE ROLLER DOORS ONLY) For mounting directly to the outside of the Garage Door.  Fit onto the outer corrugation so that the channel and Brush Strip sits neatly into an inner corrugation.  The Brush Strip rolls up neatly with the Roller Door.  Unfolds when the Roller Door closes and the bristle settles behind the Lintel to create the seal.

SIDE SEAL

Side Seals are generally fixed to the frame of the garage door, and can be mounted to the outside of the Garage Door, or inside the Garage Door.  Generally the 45 degree Angle Aluminium Holder, and 25mm bristle may be sufficient as a secondary barrier to the Roller Door Guides. Small particles may be repelled from the Strip Brush Seal fitted to the front of the Garage Door.  Prefer to hide the Strip Brush Seal on the inside of the Garage? Small particles penetrating the Door Guides would be captured by the internal Strip Brush Seal.

Single Garage Kit –

Our Kit covers garage doors up to 3000mm wide and 3000mm wide.

Option S50 – Covers up to a 50mm gap

Option S75 – Covers up to a 75mm gap

Option S100 – Covers up to a 100mm gap

Top Seal Contains:

• 2 x 1500mm Anodized Aluminium Holder with 45-degree or 25-degree profile
• 2 x 1500mm Nylon66 Brush in 4mm ZincSeal backing with 50mm, or 75mm bristle length
• Fixings – 10 x Steel Screws

Side Seals Contains:

• 4 x 1500mm Anodized Aluminium Holder with 45-degree profile
• 4 x 1500mm Nylon66 Strip Brush in 4mm ZincSeal backing with 25mm Bristle Length
• Fixings – 20 x Masonry Screws

Double Garage Kit –

Our Kit covers garage doors up to 6000mm wide and 3000mm wide.

Option D50 – Covers up to a 50mm gap

Option D75 – Covers up to a 75mm gap

Option S100 – Covers up to a 100mm gap

Top Seals Contains:

• 4 x 1500mm Anodized Aluminium Holder with 45-degree or 25-degree profile
• 4 x 1500mm Nylon66 Strip Brush in 4mm ZincSeal backing with 50mm or 75mm bristle length
• Fixings – 20 x Steel Screws

Side Seals Contains:

• 4 x 1500mm Anodized Aluminium Holder with 45-degree profile
• 4 x 1500mm Nylon66 Strip Brush in 4mm ZincSeal backing with 25mm Bristle Length
• Fixings – 20 x Masonry Screws

• Designed and made in Australia, and has the seal of the Australian Made Campaign licence
• Larger 4mm backing thickness which provides a fuller and dense coverage
• Easy to install to your Garage Door to stop birds, dust, leaves and insects flying in over the top of the Roller Door
• Anodized Aluminium Holders can be painted with an Etch Primer and Colorbond colours to match your Garage Door
• Can be mounted using Steel Screws or Rivets, and Masonry Screws for mounting Side Seals to brickwork
• If there are corrugations in your Roller Door, the bristle needs to touch the door to create the seal
• Check that the brush mounting will not impact the mechanism of the Garage Door
• If unsure, talk to your local Garage Door maintenance professional, or your Building Construction Consultant
• Heavy duty packaging to handle shipping to all parts of Australia

See our other product listings. We have Kits available for Sectional and Panel Lift Doors (Type “Sectional” in our Search Box), or you can mix and match with our “Choose your options” product listing (type “4mm” in our Search Box). Sample Kits are available to purchase so you can “try before you buy”

We have a full range of Aluminium Holders and Fire Retardant Brush Strips suitable for most domestic Garage doors, including Roller Doors, Panel Doors, Tilt Doors and Sectional Doors.  Suitable for top and bottom seal, and side seals.

Also available in 9mm backing thickness for larger or more Industrial applications.  Refer to our Product Brochure for Brush and Holder sizes.

Australia Post Shipping Is NOT available for lengths above 1 metre. Australia-Wide Flat Rate shipping available.

Please supply a physical address and contact number as our couriers cannot deliver to a PO Box.   Please also specify any special instructions for our Courier, eg. leave at side door if not at home.  Thank you.

GARAGE DOOR STRIP BRUSH – SIDE SEALS

UPDATE – Australian Standards AS 3959-2018 Construction of buildings in bushfire-prone areas – we have confirmed via independent testing our Fire Retardant Strip Brush meets the requirements for homes in BAL rated zones 12.5 up to and including BAL FZ. 

Protect your home from bush fire Ember Attack with our Fire Retardant Garage Brush Seals.  Complies with AS 3959-2018 for BAL – Bush fire attack levels 12.5, 19, 29, 40 and FZ.

Easy to DIY install to or around your Garage Door to seal up gaps to 2mm as per AS 3959-2018 Construction of buildings in bushfire-prone areas.

Suitable to help protect from dust, leaves, draughts, birds and insects.  Helps to keep your garage, home workshop or mancave cooler in summer and warmer in winter.

For mounting around both sides of your Garage Door and is mounted to the brickwork on the inside or outside of the garage with the bristle heading towards the Garage Door when the door is closed.  In most applications, from the front of the garage you will see the bristle only and not the Holder.  Used with our ROLLER door Garage Door TOP Seal.

Our SIDE SEALS Kit covers garage doors up to 3000mm high and covers up to a 25mm gap

Contains:

• 4 x 1500mm Anodized Aluminium Holder with 45-degree profile
• 4 x 1500mm Fire Retardant Nylon Strip Brush in 4mm ZincSeal backing with 25mm Nylon Brush Length
• Fixings – Nylon Masonry Anchors for Side Seals

• Designed and made in Australia, and has the seal of the Australian Made Campaign licence
• Larger 4mm backing thickness which provides a full and dense coverage of fibre
• Keeps out dust, dirt and draughts, leaves and insects
• The bristle should be just touching the door when the door is closed
• Check that the brush mounting will not impact the mechanism of the Garage Door
• Mounted from the inside of your brickwork makes the brush seal look minimal
• Can be mounted using Masonry Nylon Anchors
• Anodized Aluminium Holders can be painted with an Etch Primer and Colorbond colours to match your Garage Door
• If unsure, talk to your local Garage Door maintenance professional, or your Building Construction Consultant
• Heavy duty packaging to handle shipping to all parts of Australia

See our other product listings. We have Kits available for Roller Doors TOP SEAL (Type “Roller” in our Search Box), or you can mix and match with our “Choose your options” product listing (type “4mm” in our Search Box). Sample Packs are available to purchase so you can “try before you buy”.

We have a full range of Aluminium Holders and Fire Retardant Brush Strips suitable for most domestic Garage doors, including Roller Doors, Panel Doors, Tilt Doors and Sectional Doors.  Suitable for top and bottom seal, and side seals.

Also available in 9mm backing thickness for larger or more Industrial applications.  Refer to our Product Brochure for Brush and Holder sizes.

Australia Post Shipping Is NOT available for lengths above 1 metre. Freight Courier shipping only.

Please supply a physical address and contact number as our couriers cannot deliver to a PO Box.   Please also specify any special instructions for our Courier, eg. leave at side door if not at home.  Thank you.

SIDE SEALS for a Residential Garage Door – Suitable for ROLLER DOOR, SECTIONAL DOOR, AND TILT DOOR

Keep the elements out of your Residential Garage, with our Australian Made Strip Brush and Garage Door Seals.  Manufactured and stocked in Australia.

Suitable to help protect from dust, leaves, draughts, birds and insects.  Helps to keep your garage, home workshop or mancave cooler in summer and warmer in winter.

For mounting around both sides of your Garage Door and is mounted to the brickwork on the inside or outside of the garage with the bristle heading towards the Garage Door when the door is closed.  In most applications, from the front of the garage you will see the bristle only and not the Holder.  Used with our ROLLER door Garage Door TOP Seal.

Our SIDE SEALS Kit covers garage doors up to 3000mm high and covers up to a 25mm gap

Contains:

• 4 x 1500mm Anodized Aluminium Holder with 45-degree profile
• 4 x 1500mm Nylon Strip Brush in 4mm ZincSeal backing with 25mm Nylon Brush Length
• Fixings – Nylon Masonry Anchors for Side Seals

• Designed and made in Australia, and has the seal of the Australian Made Campaign licence
• Larger 4mm backing thickness which provides a full and dense coverage of fibre
• Keeps out dust, dirt and draughts, leaves and insects
• The bristle should be just touching the door when the door is closed
• Check that the brush mounting will not impact the mechanism of the Garage Door
• Mounted from the inside of your brickwork makes the brush seal look minimal
• Can be mounted using Masonry Nylon Anchors
• Anodized Aluminium Holders can be painted with an Etch Primer and Colorbond colours to match your Garage Door
• If unsure, talk to your local Garage Door maintenance professional, or your Building Construction Consultant
• Heavy duty packaging to handle shipping to all parts of Australia

See our other product listings. We have Kits available for Roller Doors TOP SEAL (Type “Roller” in our Search Box), or you can mix and match with our “Choose your options” product listing (type “4mm” in our Search Box). Sample Packs are available to purchase so you can “try before you buy”.

We have a full range of Aluminium Holders and Fire Retardant Brush Strips suitable for most domestic Garage doors, including Roller Doors, Panel Doors, Tilt Doors and Sectional Doors.  Suitable for top and bottom seal, and side seals.

Also available in 9mm backing thickness for larger or more Industrial applications.  Refer to our Product Brochure for Brush and Holder sizes.

Australia Post Shipping Is NOT available for lengths above 1 metre. Freight Courier shipping only.

Please supply a physical address and contact number as our couriers cannot deliver to a PO Box.   Please also specify any special instructions for our Courier, eg. leave at side door if not at home.  Thank you.

SECTIONAL OR PANEL LIFT DOOR – TOP and SIDE BRUSH SEALS

Keep the elements out of your Residential Garage, with our Australian Made Strip Brush and Garage Door Seals.  Manufactured and stocked in Australia.

Suitable to help protect from dust, leaves, draughts, small birds and insects.  Helps to keep your garage, home workshop or mancave cooler in summer and warmer in winter.

Top Seal – can be mounted under the Lintel (frame) or behind the Lintel with the bristle just touching the door when it is closed.

Side Seal – can be mounted to the brickwork around the sides of the garage door, with the bristle just touching the door when it is closed.

Single Garage Kit 

Our Kit covers garage doors up to 3000mm wide, 3000mm high and covers up to a 25mm gap

Contains:

Top:

• 2 x 1500mm  Anodized Aluminium Holder with 45-degree profile
• 2 x 1500mm Strip Brush in 4mm ZincSeal backing with 25mm Nylon Brush Length
• Fixings – 10 x Steel Screws

Sides:

• 4 x 1500mm  Anodized Aluminium Holder with 45-degree profile
• 4 x 1500mm Strip Brush in 4mm ZincSeal backing with 25mm Nylon Brush Length
• Fixings – 20 x Nylon Masonry Anchors and 20 x Steel Screws

Double Garage Kit –

Our Kit covers garage doors up to 6000mm wide and covers a gap up to 25mm

Contains:

Top:

• 4 x 1500mm  Anodized Aluminium Holder with 45-degree profile
• 4 x 1500mm Strip Brush in 4mm ZincSeal backing with 25mm Nylon Brush Length
• Fixings – 20 x Steel Screws

Sides:

• 4 x 1500mm  Anodized Aluminium Holder with 45-degree profile
• 4 x 1500mm Strip Brush in 4mm ZincSeal backing with 25mm Nylon Brush Length
• Fixings – 20 x Nylon Masonry Anchors and 20 x Steel Screws

• Designed and made in Australia, and has the seal of the Australian Made Campaign licence
• Larger 4mm backing thickness which provides a full and dense coverage of fibre
• Keeps out dust, dirt and draughts, leaves and insects
• The bristle should be just touching the door when the door is closed
• Check that the brush mounting will not impact the mechanism of the Garage Door
• Mounted from the inside of your brickwork makes the brush seal look minimal
• Can be mounted using Steel Screws or Rivets and Masonry Nylon Anchors
• Anodized Aluminium Holders can be painted with an Etch Primer and Colorbond colours to match your Garage Door
• If unsure, talk to your local Garage Door maintenance professional, or your Building Construction Consultant
• Heavy duty packaging to handle shipping to all parts of Australia

See our other product listings. We have Kits available for Roller Doors (Type “Roller” in our Search Box), or you can mix and match with our “Choose your options” product listing (type “4mm” in our Search Box). Sample Packs are available to purchase so you can “try before you buy”.

We have a full range of Aluminium Holders and Brush Strips suitable for most domestic Garage doors, including Roller Doors, Panel Doors, Tilt Doors and Sectional Doors.  Suitable for top and bottom seal, and side seals.

Also available in 9mm backing thickness for larger or more Industrial applications.  Refer to our Product Brochure for Brush and Holder sizes.

Australia Post Shipping Is NOT available for lengths above 1 metre. Freight Courier shipping only.

Please supply a physical address and contact number as our couriers cannot deliver to a PO Box.   Please also specify any special instructions for our Courier, eg. leave at side door if not at home.  Thank you.