ROCK OFF® Caravan Stone Guard Brush HITCH MOUNT KIT

The ROCK OFF Caravan Stone Guard Brush – Hitch Mount Kit is designed to reduce stone damage, road spray, and debris thrown up while towing.
Mounted directly to the tow hitch, the brush creates a flexible barrier that absorbs impact before stones reach your caravan, camper, or trailer.

Unlike rigid guards, the brush moves with the road and towing conditions. It’s tough, low-maintenance, and suitable for sealed and unsealed roads. Ideal for touring, off-road travel, and everyday towing.

Proudly Australian made using durable materials built for harsh conditions.

In Simple Terms

When you tow, your rear tyres throw stones straight at your caravan, or your towed vehicle if you travel by Motorhome.
The ROCK OFF brush sits in the firing line and stops most of that damage before it happens.

What’s Included in the Kit

• Hitch mount Powder coated steel bracket

• Heavy-duty stone guard brush assembly

• Fixings and mounting hardware

• Simple installation instructions

(Tow hitch not included)

How to Choose the Right ROCK OFF Kit – 5 Simple Steps

STEP 1 – Check your tow hitch size
Confirm your vehicle uses a standard 50mm tow hitch receiver.

STEP 2 – Measure available clearance
Ensure there is enough room on the tongue of your Hitch to hold the Hitch Mount receiver bracket.  We have 2 sizes of receiver, 40mmm and 65mm.

STEP 3 – Measure your mounting height

Take your height measurements at a time when your towing vehicle and caravan or trailer is fully loaded — this will ensure any suspension systems you have in place are considered.

Measure from the ground to the mark where the top of your ROCK OFF Hitch Mount will be located. Deduct 100mm for road clearance and a further 50mm allowance for the backing of the brush and Mounting rail, total 150mm. This will provide the ideal bristle length option for your vehicle.

Remember that our drop down options shows the “bristle length”, so you will need to allow 50mm for the brush backing when you choose. If unsure, choose your ROCK OFF at the shorter measurement – you can always lower your fitting later.  If your ROCK OFF bristle is too long, it is difficult to trim.

STEP 4 – Exhaust considerations

Keep exhaust flow and heat away from ROCK OFF. This product performs best when installed with plenty of distance away from your vehicle’s exhaust outlet. ROCK OFF is made from tough Polypropylene fibre, but it can be damaged by exhaust heat build-up.

Exhaust Shield and Extension Kits are available to allow free flow of your exhaust heat away from your towing vehicle. Alternatively, consider modifying your vehicle’s exhaust system to a side-exit style.

Recommended mounting positions:

For towing vehicles with a straight exhaust outlet: Consider mounting ROCK OFF underneath the exhaust pipe.

For towing vehicles with a downward-facing exhaust outlet:
Consider our Exhaust Extension Kit. Particularly if your exhaust outlet is less than 450mm from your intended ROCK OFF Mounting.

STEP 5 – Other considerations

Aftermarket accessories (mudflaps, chains, Anderson plugs, auxiliary fittings etc) may need consideration when determining the mounting height and bristle length of your ROCK OFF.

Note – chain-attached vehicle mud flaps are not recommended as these can cause stones to bounce underneath your ROCK OFF and strike your caravan.

Check access to accessories and auxiliary fittings such as Anderson plugs and reversing lights. These accessories may have components or cables which may impact your mounting position. If possible, mount ROCK OFF underneath or above these fittings to ensure easy access.

Easy installation video:

Why Choose Busy Bee Brushware for Your Caravan Stone Protection

• Nearly 40 years of Australian brush manufacturing experience

• Designed, tested, and made for Australian towing conditions

• Proven brush technology used across industrial and transport applications

• Practical designs focused on function, not gimmicks

• Local support, clear instructions, and replacement parts available

CLICK HERE to check out the full range of Rock Off mounting options available

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

ClearPlex® Protective Film – By the Roll or Linear Metre

ClearPlex® by Madico is a patented protective film engineered to safeguard glass in heavy-duty and high-risk environments. Unlike standard safety films, ClearPlex® is applied to the exterior surface and designed to absorb impacts from flying debris, rock strikes, or even explosive forces. This makes it ideal for use on industrial equipment, forklifts, mining and construction machinery, factory viewing panels, and reinforced glass installations where safety and uptime are critical.

Product Details:

• Thickness: 0.1016 mm (0.004″)

• Roll Length: 30.5 m (100 ft)

• Available Widths: 914 mm (36″), 1,219 mm (48″), 1,524 mm (60″), 1,829 mm (72″)

• Current Stock: 1,524 mm (60″) roll

• Supplied by the roll or cut by the linear metre

Manufactured in the USA at Madico’s (TM) ISO-certified Florida facility, ClearPlex® offers outstanding optical clarity, patented scratch resistance, and durability proven to withstand tough industrial use. It has been independently tested to absorb high-speed impacts, significantly reducing the risk of glass breakage, downtime, and costly replacements.

Key Benefits for Industrial Applications:

• Protects glass in forklifts, excavators, bulldozers, mining trucks, and plant equipment

• Reduces risk of downtime from shattered or damaged windows

• Extends the life of reinforced glass and viewing panels in hazardous environments

• Maintains high optical clarity for operator visibility

• Scratch-resistant coating withstands daily wear and cleaning

• Removable and replaceable at end of service life

Why Buy from BB Engineering Plastics?
BB Engineering Plastics has supplied industrial-grade plastics and protective materials in Australia for over 25 years. We keep ClearPlex® in local stock for fast delivery nationwide or convenient pick-up from our factory in Dandenong South, VIC). Customers choose us for:

• Reliable local supply and quick turnaround

• Technical knowledge to match the right material to your application

• Trusted service from an Australian-owned business

ClearPlex® is trusted worldwide in industrial, mining, transport, and manufacturing sectors where safety and productivity come first. Now available in Australia through BB Engineering Plastics.

Click here for your ClearPlex® Product brochure

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

Agri-Guard Brush – Chaff Suppression, Spray Control & Harvest Protection

Key Features – Why This Brush is Ideal

• Durable & Long-Lasting: UV-stabilised bristles and tough LDPE backing ensure performance in outdoor conditions.

• Customisable Lengths: Continuous rolls up to 25m can be cut to suit any application, making it versatile for different equipment.

• Easy to Install: Drill through the top 10mm and fix with Tek screws or rivets every 150–200mm for a secure fit.

• Effective Suppression: Dense single line of bristles efficiently controls chaff, swarf, spray drift, and debris.

• Versatile Applications: Perfect for harvesting machinery, sprayers, and other agricultural equipment.

• Convenient Packaging: Available in 1m lengths, 10m or 25m coils for easy shipping, handling and storage.

Specifications

• Hard-wearing LDPE backing: 25mm high × 10mm thick

• Single line of heavy-duty UV-stabilised polypropylene bristles (0.012″ or 0.018″)

• Manufactured in continuous rolls up to 25m

• Backing can be drilled through the top 10mm without affecting tufting

Durable, High-Performance Construction

The Agri-Guard Brush is engineered for farmers, agribusiness operators, and equipment manufacturers seeking reliable debris, chaff, and spray management on harvesting and spraying machinery. Its hard-wearing LDPE backing provides a lightweight but robust base, while the single dense line of bristles delivers effective suppression and control for a variety of applications.

Premium UV-Stabilised Bristles

The bristles are made from heavy-duty UV-stabilised polypropylene, designed for outdoor conditions and long-lasting performance. This setup is ideal for controlling chaff, swarf, chemical spray drift, and other debris, keeping machinery cleaner and more efficient during operations.

Flexible Lengths & Easy Installation

The Agri-Guard Brush is manufactured in continuous rolls up to 25m, allowing you to cut the brush to your exact requirements. Single 1m lengths purchased in multiples will be shipped as a continuous roll, and larger boxes are available in 10m or 25m coils. Installation is straightforward: drill through the top 10mm of the backing and fix directly to your equipment using Tek screws or rivets every 150–200mm.

Versatile Applications

This brush is suitable for a wide range of applications, including:

• Chaff and swarf suppression during harvesting
• Spray direction and containment on agricultural machinery
• Protecting sensitive surfaces on farm equipment
• Outdoor durability for long-term performance in Australian conditions

Why Choose Busy Bee Brushware?

Manufactured in Australia with over 25 years of expertise, Busy Bee Brushware delivers quality, reliability, and fast turnaround. Our skilled team ensures each product meets strict standards and provides expert advice to help you select the right solution. Choosing Busy Bee means investing in Australian-made brushes built to perform every day on farms and in agribusiness.

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

Stable-iser Brush – Stable Guard Brush for Horses and Livestock

The Stable-iser Brush is a practical and durable solution for maintaining a cleaner and tidier stable environment.  This brush fits securely to the floor of a horse or livestock stable to reduce the amount of hay, straw, and bedding dragged outside the stall. The bristles stand upright, allowing hooves to pass through while stopping bedding from leaving the stable. So keeping work areas cleaner and reducing waste. Designed and manufactured in Australia.

Built with strength and longevity in mind, the Stable-iser Brush is made from high-quality materials. Proven in tough conditions and safe for animals.

Product Specifications

• Size: 1980mm x 150mm trim – can be cut to your desired length
• Backing: 25mm x 45mm Black HDPE with chamfered edge
• Mounting: Countersunk holes for secure and easy installation
• Bristles: 2 staggered rows of 0.040″ Black UV stabilised polypropylene fibre
• Trim height: 150mm

Key Features

• Reduces mess and waste: Prevents stable bedding and feed from being dragged out onto walkways.
• Animal safe: Bristles are firm enough to hold their position but flexible enough to allow hooves to pass through without scratching or causing harm.
• Built to last: Backing made from durable HDPE with UV stabilised polypropylene bristles for long-term performance.
• Easy to install: Pre-drilled countersunk holes allow for quick and secure fixing to stable floors.
• Australian made: Manufactured locally to ensure high quality, fast supply, and support for Australian industries.

Why Choose the Stable-iser Brush?

A stable environment needs to be both safe and efficient. Loose hay and bedding outside the stall not only create unnecessary cleaning work but can also be a slipping hazard. The Stable-iser Brush helps contain bedding inside the stable, saving time and effort for horse owners and stable managers. Its robust design ensures that it withstands heavy daily use, while the flexible polypropylene fibres allow horses to step through comfortably.

The Stable-iser Brush is a cost-effective and reliable stable guard brush that reduces waste, cuts down on cleaning, and helps maintain a neater, safer work environment around your animals. Whether you manage a small private stable or a large equestrian facility, this brush provides a simple and effective solution to a common problem.

Why Choose Busy Bee Brushware for Your Stable-iser Brush?

Busy Bee Brushware has been manufacturing quality Australian-made brushware for nearly 40 years. With proven experience supplying both custom and industrial brush solutions, we understand the importance of durability, safety, and fast turnaround. Every Stable-iser Brush is built in our Melbourne facility using premium materials to ensure long service life, reliable performance, and peace of mind. When you choose Busy Bee Brushware, you’re supporting a trusted Australian manufacturer dedicated to quality and customer service.

Click here for Fitting Instructions.

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

Tennis Court Line Sweeping Broomhead – Keep Your Court Lines Sharp and Professional

Maintain precision and presentation on your tennis court with our purpose-built Tennis Court Line Sweeping Broomhead

Designed specifically for sweeping sand and debris off court lines. This broom head ensures clear visibility for accurate play and a polished, professional appearance. Whether you’re prepping for a match or maintaining your court between games, this tool is a must-have for any serious tennis facility.

Engineered for Performance and Durability

• Backing Material: Treated pine – highly resistant to moisture, UV exposure, and outdoor wear.
• Bristles: Hard-wearing polypropylene fibre – tough on sand, gentle on court surfaces.
• Angled Handle Fitting: Optimised for forward sweeping along court lines

Cost-Effective and Convenient

To help reduce freight costs, this product is supplied as the broom head only. Simply purchase a 22mm diameter timber broom handle or length of 22m diameter dowel from your local hardware store and glue it securely into the fitting. This DIY approach saves on shipping while giving you flexibility in handle length and style.

Key Features

• Specially designed for tennis court line sweeping
• Durable treated pine block for long-lasting outdoor use
• Tough polypropylene bristles – effective on sand and built to last
• Angled fitting for easy forward sweeping along court lines
• Supplied without handle – fits standard 22mm timber handle
• Proudly manufactured in Melbourne, Australia

Ideal For

• Tennis clubs and academies
• School sports facilities
• Private home courts
• Professional court maintenance contractors

Looking for full-court sweeping solutions? Check out our Tennis Court Brooms with optional D-handle  – built tough for complete court maintenance in all weather conditions.

What is UHMWPE?

UHMWPE (Ultra-High Molecular Weight Polyethylene) is a tough, low-friction plastic with high wear resistance, impact strength, and chemical resistance. It’s self-lubricating, moisture-resistant, and widely used in industrial applications like chute liners, wear strips, and conveyor components. Lightweight and easy to machine, it reduces friction and withstands extreme conditions.

What are the properties of UHMWPE?

• Durability: UHMWPE is highly durable, offering exceptional wear resistance, impact strength, and chemical resistance, making it suitable for harsh environments and heavy-duty applications.
• Chemical Resistance: UHMWPE has excellent chemical resistance, withstanding most acids, alkalis, and solvents, but it can be affected by strong oxidizers like nitric or sulfuric acid.
• Weather Resistance: UHMWPE has good weather resistance, being UV-stable to some extent, but prolonged sun exposure can cause degradation without additives.
• Versatility: UHMWPE is highly versatile, used in industries like mining, food processing, marine, and material handling due to its durability, low friction, and chemical resistance.
• Low Moisture Absorption: Yes, UHMWPE has extremely low moisture absorption, making it ideal for wet environments and applications requiring dimensional stability.
• Lightweight: UHMWPE is lightweight, with a density lower than water, allowing it to float and making it easy to handle and install.

Can UHMWPE handle heat?

UHMWPE has moderate heat resistance, with a continuous use temperature of around 80–100°C. It softens above this range and melts at approximately 130–140°C. While it can handle brief exposure to higher temperatures, prolonged heat weakens its structure.

Unlike high-temperature plastics like PTFE or PEEK, UHMWPE is not ideal for extreme heat applications. However, it performs well in cold environments, remaining tough and impact-resistant even at -200°C. For applications requiring higher heat resistance, alternative materials or UHMWPE blends with heat stabilizers may be needed.

Is UHMWPE Plastic suitable for Food Grade applications?

Yes, UHMWPE is suitable for food-grade applications due to the following reasons:

• FDA & EU Compliance – Meets food safety regulations for direct contact with food.
• Non-Toxic & Odorless – Does not contaminate food products.
• Low Moisture Absorption – Prevents bacterial growth and maintains hygiene.
• Chemical Resistance – Withstands cleaning agents and sanitizers without degradation.
• Low Friction Surface – Reduces sticking and eases material flow in food processing.
• High Wear Resistance – Durable for conveyor systems, cutting boards, and food equipment.
• Temperature Limits – Suitable for cold and moderate heat applications but not for high-temperature cooking.
• Easy to Machine & Maintain – Can be cut, shaped, and cleaned efficiently.

Common uses include conveyor components, cutting boards, wear strips, and food processing machinery parts. However, always verify specific grade compliance with industry standards.

How strong is UHMWPE?

UHMWPE is a strong and durable plastic with the following key properties:

• High Impact Strength – Absorbs heavy impacts without cracking or breaking.
• Excellent Wear Resistance – Outlasts many other plastics in abrasive environments.
• Tensile Strength – Typically ranges from 20–40 MPa, lower than metals but sufficient for heavy-duty applications.
• High Energy Absorption – Can withstand repeated stress and deformation without failure.
• Self-Lubricating – Reduces friction and wear in moving parts.
• Good Fatigue Resistance – Maintains strength under repeated load cycles.
• Low Notch Sensitivity – Less prone to cracking or breaking under stress.

Commonly used in conveyor systems, chute liners, marine fenders, and impact-resistant parts. While strong for plastic, it is not as rigid as metals and may deform under excessive load.

Uses of UHMWPE Rod:

• Conveyor components (guides, wear strips, rollers)
• Chute and hopper liners
• Cutting boards (food-grade applications)
• Marine fenders and dock bumpers
• Sprockets and chain guides
• Gears and bushings
• Bearings and wear pads
• Material handling equipment (slides, rollers)
• Truck bed liners
• Snowplow and scraper blades
• Medical implants (joint replacements)
• Bulletproof vests and armor panels
• Mining equipment (liners, guides)
• Pulp and paper industry components
• Chemical-resistant tank linings

What colour is UHMWPE Engineering Rod?

UHMWPE Rod is available in Natural (White), Black, Blue and Green

Why choose BB Engineering Plastics as your Plastic Rod Supplier?

With 25+ years’ experience in the supply of engineering plastic sheet and rod, Busy Bee is proud of our ability to source and supply small batch quantities quickly and efficiently to the Australian market. So, if you are looking for cut to size engineering solid plastic rod supplier, Busy Bee is your one stop shop.

Check out our other Plastic options online:

Acetal Rod

Nylon Rod

PTFE Teflon Rod

Polycarbonate Flat Sheet

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

DISCLAIMER: It’s always the clients decision to ensure that the materials are right for the specification.

Heavy-Duty Tube Brushes for Cleaning Chem-Set Holes

Proper hole preparation is critical for a strong chemical anchor bond, and our Heavy-Duty Tube Brushes are designed specifically for this task. Whether you’re anchoring bolts, reinforcing structures, or securing heavy-duty fixings, cleaning the hole thoroughly before applying ChemSet adhesive ensures maximum strength and durability.

Why Use Our Tube Brushes?

✔ Durable Construction – Made with stiff Polypropylene fibre and a Galvanized Wire twisted stem for long-lasting performance.
✔ Effective Cleaning – Strong bristles remove dust, debris, and contaminants for a clean bond surface.
✔ Three Sizes Available – Covering most standard hole diameters used in chemical anchoring.
✔ Reusable & Cost-Effective – Built to withstand repeated use without compromising performance.

Description:

•  12mm Dia Tube Brush – 320mm Long (Green Loop) suitable for Tubes 8mm-12mm
• 16mm Dia Tube Brush – 320mm Long (Red Loop) suitable for Tubes 10mm-16mm
• 28mm Dia Tube Brush – 320mm Long (Blue Loop) suitable for Tubes 16mm-28mm

How to Clean Chem-Set Holes with a Tube Brush

1. Blow Out Loose Debris – Use compressed air or a hand pump to remove dust and loose particles from the drilled hole. Insert the nozzle fully and blow air out while withdrawing.
2. Brush the Hole – Insert the tube brush to the full depth of the hole, then rotate and move it in and out several times to loosen dust.
3. Blow Again – Use compressed air or a hand pump again to remove the loosened debris.
4. Repeat the Process – For best results, follow the blow-brush-blow method at least three times to ensure the hole is completely clean.
5. Final Inspection – Visually check that the hole is free from dust before applying ChemSet adhesive.

This process ensures a strong, reliable bond, reducing the risk of failure in your anchoring application.

Why Choose Busy Bee Brushware?

At Busy Bee Brushware, we’ve been manufacturing high-quality industrial brushes for nearly 40 years. Our products are made to withstand tough conditions and deliver reliable results. We take pride in offering durable, well-engineered solutions backed by fast turnaround times and excellent customer service. With a strong reputation in the industry and products licensed with Australian Made, you can trust us to provide the right tools for the job.

Need Tube Brushes for Other Applications?

Our heavy-duty tube brushes aren’t just for ChemSet holes. If you need a brush for another application, get in touch—we have a wide range of brushware solutions to suit different industries and requirements.

Contact us today to place an order or to find the right brush for your needs.

Dustpan & Broom Set Tradesman XL Yellow

The Tradesman XL Dustpan & Broom Set (Yellow) is a heavy-duty cleaning tool designed for efficient debris collection.

With a 335mm wide pan and 430mm overall length, it holds more debris, reducing the need for frequent emptying. Its sturdy construction ensures durability, making it suitable for both indoor and outdoor use on various surfaces, including concrete, tiles, and workshop floors.

The extra-large design allows for quicker, more effective cleaning, saving time and effort. Ideal for tradies, workshops, and commercial spaces, this set provides a reliable solution for handling larger messes with ease.

Maximize Solar Efficiency with a Soap Foaming Tool and Water-fed Extendable Wash Brush Kit

Solar panels are a fantastic investment, helping to reduce energy bills and promote sustainability. However, to keep them operating at peak efficiency, regular cleaning is essential. Dust, dirt, bird droppings, and pollution can accumulate on the surface, blocking sunlight and reducing energy output. Fortunately, using a Soap Foaming Tool and a Water-fed Extendable Length Wash Brush Kit makes the job easier, safer, and more effective.

Why Clean Your Solar Panels?

Solar panels rely on direct sunlight to generate electricity. Any obstruction reduces their efficiency, sometimes by as much as 20–25%. Rain can help wash away some debris, but it often leaves behind dirt streaks and mineral deposits. Regular maintenance ensures you get the maximum return on your investment.

The Benefits of a Soap Foaming Tool

A Soap Foaming Tool allows for an even distribution of a gentle, panel-safe cleaning solution. It helps to:

• Loosen tough grime and dirt without scrubbing aggressively.
• Reduce water usage, as the foam clings to surfaces and lifts debris efficiently.
• Ensure a streak-free clean, preventing water spots that could further block sunlight.

The Advantages of an Extendable Wash Brush Kit

Cleaning solar panels often requires reaching high and difficult spots. An Extendable Length Wash Brush Kit provides:

• Safety and convenience, allowing you to clean from the ground without climbing onto the roof.
• Soft bristles designed for delicate surfaces, preventing scratches.
• Adjustable length, making it easy to reach panels on larger or higher rooftops.

Choose your size! Choose your kit!

Brush Options: 

Ultra soft fibres gently remove dust and dirt. PVC backing with soft feather tipped PVC bristles. High quality long lasting brush heads.  Ajax/US thread is suitable for water-fed poles. Can also be fitted to a standard Painters Pole.

• 13″ Bi-level (fibre on 2-sides)
• 15″ Bi-level (fibre on 2-sides)

Pole Lengths:

The BUSY BEE Water Fed Wash Pole is an anodized aluminium, telescopic water-fed wash pole. So its compact design allows for easier storage. Furthermore, the telescopic poles give you effective reach for cleaning your solar panels.  With comfortable EVA foam grips and 3 way adaptor(hi/low/off switch), your BUSY BEE Water Fed Wash Pole is easy to store and great to use.

•  103cm pole extends out to 165cm
• 176cm pole extends out to 300cm

Each Kit Contains our Soap Foaming Wash Tool

Our Soap Foaming Wash Tool gives you a great clean from its thick, rich foaming action.  It is designed to cover the surface with a thick layer of foam which breaks down the dirt and drips off without the need for harsh brushing.  Saves you TIME and WATER.  Reduces the need to keep replacing dirty bucket water.  Simply fill the heavy duty container, connect to your hose and foam away.  And with the quick release nozzle, rinsing is easy.

With 6 soap volume options and 2 different nozzles you can easily control your foam application.

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

Click here for our Wash Brush only options.

Made in Taiwan

HEAVY DUTY TRUCK MUD FLAPS – BLACK – SET OF 2

Suitable for your large or heavy duty applications. Not rubber or PVC, these are made from HDPE High Density Polyethylene. So they are made for your bigger trucks, large earth movers and mining vehicles, road maintenance equipment.

HDPE mud flaps provide great protection against road debris, reducing the risk of damage to your vehicle’s undercarriage and enhancing safety. It helps to prevent mud, water and other debris kicking up onto the vehicle or trailer, or underneath.

High-Density Polyethylene (HDPE) is an excellent material choice for your truck mud flaps due to its durability, flexibility, and resistance to corrosion, chemicals, and UV radiation. Made to last. They are lightweight, which contributes to fuel efficiency of your vehicle. As well as making installation easier. No specialised equipment is required for fitting. Install your own bolt holes as required.  Comes with small 5mm radius on each corner.

The surface inhibits mud and other debris from building up. You will find these much easier to wash than your standard rubber or other plastic mud flaps.   Mud literally slides off.

Additionally, HDPE is recyclable, making it your environmentally friendly option.

Available Sizes – SET OF 2 

24″/605mm Width

• 24″/605mm
• 30″/760mm
• 36″/910mm

29″/740mm WIDTH

• 29″/740mm
• 36″/910mm
• 39″/990mm

39″/990mm

• 24″/605mm
• 29″/740mm
• 36″/910mm

Custom Sizes available:  please contact us with your measurements.  Or you can choose one size larger than needed, but when you go to our Shopping Cart/Checkout let us know in your purchase comments the size that you would like to have cut.

Packaging:  We flat pack your Truck Mud Flaps in heavy duty cardboard to protect it during transit. Your Truck Mud Flaps may also have a protective film which you peel off prior to installation.  If you have trouble removing the film, try sticking some tape near the edge to lift the film and peel off.

Shipping:

For sizes 1000mm and over, please supply a location address and phone number in your comments. Australia Post shipping not available for sizes over 1000mm, flat rate courier shipping only.

Check out our Truck Whiskers here.

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.