HEAVY DUTY TRUCK MUD FLAPS – BLACK – SET OF 2

Suitable for your large or heavy duty applications. Not rubber or PVC, these are made from HDPE High Density Polyethylene. So they are made for your bigger trucks, large earth movers and mining vehicles, road maintenance equipment.

HDPE mud flaps provide great protection against road debris, reducing the risk of damage to your vehicle’s undercarriage and enhancing safety. It helps to prevent mud, water and other debris kicking up onto the vehicle or trailer, or underneath.

High-Density Polyethylene (HDPE) is an excellent material choice for your truck mud flaps due to its durability, flexibility, and resistance to corrosion, chemicals, and UV radiation. Made to last. They are lightweight, which contributes to fuel efficiency of your vehicle. As well as making installation easier. No specialised equipment is required for fitting. Install your own bolt holes as required.  Comes with small 5mm radius on each corner.

The surface inhibits mud and other debris from building up. You will find these much easier to wash than your standard rubber or other plastic mud flaps.   Mud literally slides off.

Additionally, HDPE is recyclable, making it your environmentally friendly option.

Available Sizes – SET OF 2 

24″/605mm Width

• 24″/605mm
• 30″/760mm
• 36″/910mm

29″/740mm WIDTH

• 29″/740mm
• 36″/910mm
• 39″/990mm

39″/990mm

• 24″/605mm
• 29″/740mm
• 36″/910mm

Custom Sizes available:  please contact us with your measurements.  Or you can choose one size larger than needed, but when you go to our Shopping Cart/Checkout let us know in your purchase comments the size that you would like to have cut.

Packaging:  We flat pack your Truck Mud Flaps in heavy duty cardboard to protect it during transit. Your Truck Mud Flaps may also have a protective film which you peel off prior to installation.  If you have trouble removing the film, try sticking some tape near the edge to lift the film and peel off.

Shipping:

For sizes 1000mm and over, please supply a location address and phone number in your comments. Australia Post shipping not available for sizes over 1000mm, flat rate courier shipping only.

Check out our Truck Whiskers here.

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

Keep your pens handy with our industrial strength Workstation Magnetic Pen Holder.

Your best mate in the factory, workshop, warehouse, on the forklift or any worksite.

What is a Workstation Magnetic Pen Holder?

Made from 3D printed PLA Polyester, so is strong and hard wearing.  Fitted with an industrial strength Pot Magnet N38 ASNQ-A42. Designed with 2 holes, one for a standard pen, the other for a Permanent Marker. Keeps your pens close and ready to use at any time.

How to use your Workstation Magnetic Pen Holder:

• Designed for the workshop, factory, construction or worksite or warehouse
• Attach to cabinets, pallet racks, machinery, stairs, forklifts, utes, anything magnetic!
• Portable – can be relocated as needed without dismantling
• Strong – not easy to knock over, holds well to any steel surface
• Encourages return of the pens to their Holders, less likely to disappear in pockets!
• One for each workstation in line with LEAN Principles, the right tool exactly where you need it
• Coloured for easy identification

What colours does the Workstation Magnetic Pen Holder come in?

Red, Blue, Yellow, Green

Purchase as Singles, 3-pack, 6-pack, 12-pack

Purchase as a 4 colour pack in pack of 4, and pack of 12 (3 of each colour)

Options:

• Pen Holder including Magnet – you supply your own pens
• Complete with Artline 70 Permanent Marker Black and our own Busy Bee stylus Pen

How can I purchase?

Buy as Singles, or in quantities of 3 units, 6 units, 12 units.  Or purchase in packs of 4 with one of each colour in multiple packs of single (4 pen holders), or 3-pack (12 pen holders).

Why choose BB Engineering Plastics as your Plastic Supplier?

With 25+ years’ experience in the supply of engineering plastic sheet and rod, Busy Bee is proud of our ability to source and supply small batch quantities quickly and efficiently to the Australian market. So, if you are looking for cut to size engineering solid plastic rod supplier, Busy Bee is your one stop shop.

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

Lifting blocks – also called bushes, spacers or packers

Ideal for heavy duty applications, constructed with sturdy HDPE (High Density Polyethylene).

Great for 4WD vehicle rough and tumble. Can also be used on motorbikes as axle oggy sliders or crash bobbins.

Other uses include mounting plates or packers for machinery, transport, and manufacturing applications.

Colours include BLACK or NATURAL (white). Choose your options.

Smaller design allows for mounting in limited space.

12mm internal bore diameter.

(Does not include fittings)

YOUR AVAILABLE SIZES:

#customTable#
Custom sizes are available for orders of 20 units or more. Please Contact Us for a quote.

Disclaimer: It is your responsibility to ensure this product is suitable for your specific application

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

Used for checking the sizing in communication and electrical conduits.  Recommended and used for the Telstra and NBN cabling installations

Made from Coloured Acetal Rod. These Mandrels are hard wearing and cover a range of sizes for your full installation requirements.  Each Mandrel has an 8mm bore, 80mm overall length (except 12mm dia – overall length is 50mm)