Agri-Guard Brush – Chaff Suppression, Spray Control & Harvest Protection

Key Features – Why This Brush is Ideal

• Durable & Long-Lasting: UV-stabilised bristles and tough LDPE backing ensure performance in outdoor conditions.

• Customisable Lengths: Continuous rolls up to 25m can be cut to suit any application, making it versatile for different equipment.

• Easy to Install: Drill through the top 10mm and fix with Tek screws or rivets every 150–200mm for a secure fit.

• Effective Suppression: Dense single line of bristles efficiently controls chaff, swarf, spray drift, and debris.

• Versatile Applications: Perfect for harvesting machinery, sprayers, and other agricultural equipment.

• Convenient Packaging: Available in 1m lengths, 10m or 25m coils for easy shipping, handling and storage.

Specifications

• Hard-wearing LDPE backing: 25mm high × 10mm thick

• Single line of heavy-duty UV-stabilised polypropylene bristles (0.012″ or 0.018″)

• Manufactured in continuous rolls up to 25m

• Backing can be drilled through the top 10mm without affecting tufting

Durable, High-Performance Construction

The Agri-Guard Brush is engineered for farmers, agribusiness operators, and equipment manufacturers seeking reliable debris, chaff, and spray management on harvesting and spraying machinery. Its hard-wearing LDPE backing provides a lightweight but robust base, while the single dense line of bristles delivers effective suppression and control for a variety of applications.

Premium UV-Stabilised Bristles

The bristles are made from heavy-duty UV-stabilised polypropylene, designed for outdoor conditions and long-lasting performance. This setup is ideal for controlling chaff, swarf, chemical spray drift, and other debris, keeping machinery cleaner and more efficient during operations.

Flexible Lengths & Easy Installation

The Agri-Guard Brush is manufactured in continuous rolls up to 25m, allowing you to cut the brush to your exact requirements. Single 1m lengths purchased in multiples will be shipped as a continuous roll, and larger boxes are available in 10m or 25m coils. Installation is straightforward: drill through the top 10mm of the backing and fix directly to your equipment using Tek screws or rivets every 150–200mm.

Versatile Applications

This brush is suitable for a wide range of applications, including:

• Chaff and swarf suppression during harvesting
• Spray direction and containment on agricultural machinery
• Protecting sensitive surfaces on farm equipment
• Outdoor durability for long-term performance in Australian conditions

Why Choose Busy Bee Brushware?

Manufactured in Australia with over 25 years of expertise, Busy Bee Brushware delivers quality, reliability, and fast turnaround. Our skilled team ensures each product meets strict standards and provides expert advice to help you select the right solution. Choosing Busy Bee means investing in Australian-made brushes built to perform every day on farms and in agribusiness.

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

Stable-iser Brush – Stable Guard Brush for Horses and Livestock

The Stable-iser Brush is a practical and durable solution for maintaining a cleaner and tidier stable environment.  This brush fits securely to the floor of a horse or livestock stable to reduce the amount of hay, straw, and bedding dragged outside the stall. The bristles stand upright, allowing hooves to pass through while stopping bedding from leaving the stable. So keeping work areas cleaner and reducing waste. Designed and manufactured in Australia.

Built with strength and longevity in mind, the Stable-iser Brush is made from high-quality materials. Proven in tough conditions and safe for animals.

Product Specifications

• Size: 1980mm x 150mm trim – can be cut to your desired length
• Backing: 25mm x 45mm Black HDPE with chamfered edge
• Mounting: Countersunk holes for secure and easy installation
• Bristles: 2 staggered rows of 0.040″ Black UV stabilised polypropylene fibre
• Trim height: 150mm

Key Features

• Reduces mess and waste: Prevents stable bedding and feed from being dragged out onto walkways.
• Animal safe: Bristles are firm enough to hold their position but flexible enough to allow hooves to pass through without scratching or causing harm.
• Built to last: Backing made from durable HDPE with UV stabilised polypropylene bristles for long-term performance.
• Easy to install: Pre-drilled countersunk holes allow for quick and secure fixing to stable floors.
• Australian made: Manufactured locally to ensure high quality, fast supply, and support for Australian industries.

Why Choose the Stable-iser Brush?

A stable environment needs to be both safe and efficient. Loose hay and bedding outside the stall not only create unnecessary cleaning work but can also be a slipping hazard. The Stable-iser Brush helps contain bedding inside the stable, saving time and effort for horse owners and stable managers. Its robust design ensures that it withstands heavy daily use, while the flexible polypropylene fibres allow horses to step through comfortably.

The Stable-iser Brush is a cost-effective and reliable stable guard brush that reduces waste, cuts down on cleaning, and helps maintain a neater, safer work environment around your animals. Whether you manage a small private stable or a large equestrian facility, this brush provides a simple and effective solution to a common problem.

Why Choose Busy Bee Brushware for Your Stable-iser Brush?

Busy Bee Brushware has been manufacturing quality Australian-made brushware for nearly 40 years. With proven experience supplying both custom and industrial brush solutions, we understand the importance of durability, safety, and fast turnaround. Every Stable-iser Brush is built in our Melbourne facility using premium materials to ensure long service life, reliable performance, and peace of mind. When you choose Busy Bee Brushware, you’re supporting a trusted Australian manufacturer dedicated to quality and customer service.

Click here for Fitting Instructions.

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

Tennis Court Line Sweeping Broomhead – Keep Your Court Lines Sharp and Professional

Maintain precision and presentation on your tennis court with our purpose-built Tennis Court Line Sweeping Broomhead

Designed specifically for sweeping sand and debris off court lines. This broom head ensures clear visibility for accurate play and a polished, professional appearance. Whether you’re prepping for a match or maintaining your court between games, this tool is a must-have for any serious tennis facility.

Engineered for Performance and Durability

• Backing Material: Treated pine – highly resistant to moisture, UV exposure, and outdoor wear.
• Bristles: Hard-wearing polypropylene fibre – tough on sand, gentle on court surfaces.
• Angled Handle Fitting: Optimised for forward sweeping along court lines

Cost-Effective and Convenient

To help reduce freight costs, this product is supplied as the broom head only. Simply purchase a 22mm diameter timber broom handle or length of 22m diameter dowel from your local hardware store and glue it securely into the fitting. This DIY approach saves on shipping while giving you flexibility in handle length and style.

Key Features

• Specially designed for tennis court line sweeping
• Durable treated pine block for long-lasting outdoor use
• Tough polypropylene bristles – effective on sand and built to last
• Angled fitting for easy forward sweeping along court lines
• Supplied without handle – fits standard 22mm timber handle
• Proudly manufactured in Melbourne, Australia

Ideal For

• Tennis clubs and academies
• School sports facilities
• Private home courts
• Professional court maintenance contractors

Looking for full-court sweeping solutions? Check out our Tennis Court Brooms with optional D-handle  – built tough for complete court maintenance in all weather conditions.

Heavy-Duty Tube Brushes for Cleaning Chem-Set Holes

Proper hole preparation is critical for a strong chemical anchor bond, and our Heavy-Duty Tube Brushes are designed specifically for this task. Whether you’re anchoring bolts, reinforcing structures, or securing heavy-duty fixings, cleaning the hole thoroughly before applying ChemSet adhesive ensures maximum strength and durability.

Why Use Our Tube Brushes?

✔ Durable Construction – Made with stiff Polypropylene fibre and a Galvanized Wire twisted stem for long-lasting performance.
✔ Effective Cleaning – Strong bristles remove dust, debris, and contaminants for a clean bond surface.
✔ Three Sizes Available – Covering most standard hole diameters used in chemical anchoring.
✔ Reusable & Cost-Effective – Built to withstand repeated use without compromising performance.

Description:

•  12mm Dia Tube Brush – 320mm Long (Green Loop) suitable for Tubes 8mm-12mm
• 16mm Dia Tube Brush – 320mm Long (Red Loop) suitable for Tubes 10mm-16mm
• 28mm Dia Tube Brush – 320mm Long (Blue Loop) suitable for Tubes 16mm-28mm

How to Clean Chem-Set Holes with a Tube Brush

1. Blow Out Loose Debris – Use compressed air or a hand pump to remove dust and loose particles from the drilled hole. Insert the nozzle fully and blow air out while withdrawing.
2. Brush the Hole – Insert the tube brush to the full depth of the hole, then rotate and move it in and out several times to loosen dust.
3. Blow Again – Use compressed air or a hand pump again to remove the loosened debris.
4. Repeat the Process – For best results, follow the blow-brush-blow method at least three times to ensure the hole is completely clean.
5. Final Inspection – Visually check that the hole is free from dust before applying ChemSet adhesive.

This process ensures a strong, reliable bond, reducing the risk of failure in your anchoring application.

Why Choose Busy Bee Brushware?

At Busy Bee Brushware, we’ve been manufacturing high-quality industrial brushes for nearly 40 years. Our products are made to withstand tough conditions and deliver reliable results. We take pride in offering durable, well-engineered solutions backed by fast turnaround times and excellent customer service. With a strong reputation in the industry and products licensed with Australian Made, you can trust us to provide the right tools for the job.

Need Tube Brushes for Other Applications?

Our heavy-duty tube brushes aren’t just for ChemSet holes. If you need a brush for another application, get in touch—we have a wide range of brushware solutions to suit different industries and requirements.

Contact us today to place an order or to find the right brush for your needs.

Dustpan & Broom Set Tradesman XL Yellow

The Tradesman XL Dustpan & Broom Set (Yellow) is a heavy-duty cleaning tool designed for efficient debris collection.

With a 335mm wide pan and 430mm overall length, it holds more debris, reducing the need for frequent emptying. Its sturdy construction ensures durability, making it suitable for both indoor and outdoor use on various surfaces, including concrete, tiles, and workshop floors.

The extra-large design allows for quicker, more effective cleaning, saving time and effort. Ideal for tradies, workshops, and commercial spaces, this set provides a reliable solution for handling larger messes with ease.

Maximize Solar Efficiency with a Soap Foaming Tool and Water-fed Extendable Wash Brush Kit

Solar panels are a fantastic investment, helping to reduce energy bills and promote sustainability. However, to keep them operating at peak efficiency, regular cleaning is essential. Dust, dirt, bird droppings, and pollution can accumulate on the surface, blocking sunlight and reducing energy output. Fortunately, using a Soap Foaming Tool and a Water-fed Extendable Length Wash Brush Kit makes the job easier, safer, and more effective.

Why Clean Your Solar Panels?

Solar panels rely on direct sunlight to generate electricity. Any obstruction reduces their efficiency, sometimes by as much as 20–25%. Rain can help wash away some debris, but it often leaves behind dirt streaks and mineral deposits. Regular maintenance ensures you get the maximum return on your investment.

The Benefits of a Soap Foaming Tool

A Soap Foaming Tool allows for an even distribution of a gentle, panel-safe cleaning solution. It helps to:

• Loosen tough grime and dirt without scrubbing aggressively.
• Reduce water usage, as the foam clings to surfaces and lifts debris efficiently.
• Ensure a streak-free clean, preventing water spots that could further block sunlight.

The Advantages of an Extendable Wash Brush Kit

Cleaning solar panels often requires reaching high and difficult spots. An Extendable Length Wash Brush Kit provides:

• Safety and convenience, allowing you to clean from the ground without climbing onto the roof.
• Soft bristles designed for delicate surfaces, preventing scratches.
• Adjustable length, making it easy to reach panels on larger or higher rooftops.

Choose your size! Choose your kit!

Brush Options: 

Ultra soft fibres gently remove dust and dirt. PVC backing with soft feather tipped PVC bristles. High quality long lasting brush heads.  Ajax/US thread is suitable for water-fed poles. Can also be fitted to a standard Painters Pole.

• 13″ Bi-level (fibre on 2-sides)
• 15″ Bi-level (fibre on 2-sides)

Pole Lengths:

The BUSY BEE Water Fed Wash Pole is an anodized aluminium, telescopic water-fed wash pole. So its compact design allows for easier storage. Furthermore, the telescopic poles give you effective reach for cleaning your solar panels.  With comfortable EVA foam grips and 3 way adaptor(hi/low/off switch), your BUSY BEE Water Fed Wash Pole is easy to store and great to use.

•  103cm pole extends out to 165cm
• 176cm pole extends out to 300cm

Each Kit Contains our Soap Foaming Wash Tool

Our Soap Foaming Wash Tool gives you a great clean from its thick, rich foaming action.  It is designed to cover the surface with a thick layer of foam which breaks down the dirt and drips off without the need for harsh brushing.  Saves you TIME and WATER.  Reduces the need to keep replacing dirty bucket water.  Simply fill the heavy duty container, connect to your hose and foam away.  And with the quick release nozzle, rinsing is easy.

With 6 soap volume options and 2 different nozzles you can easily control your foam application.

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

Click here for our Wash Brush only options.

Made in Taiwan

Keep your pens handy with our industrial strength Workstation Magnetic Pen Holder.

Your best mate in the factory, workshop, warehouse, on the forklift or any worksite.

What is a Workstation Magnetic Pen Holder?

Made from 3D printed PLA Polyester, so is strong and hard wearing.  Fitted with an industrial strength Pot Magnet N38 ASNQ-A42. Designed with 2 holes, one for a standard pen, the other for a Permanent Marker. Keeps your pens close and ready to use at any time.

How to use your Workstation Magnetic Pen Holder:

• Designed for the workshop, factory, construction or worksite or warehouse
• Attach to cabinets, pallet racks, machinery, stairs, forklifts, utes, anything magnetic!
• Portable – can be relocated as needed without dismantling
• Strong – not easy to knock over, holds well to any steel surface
• Encourages return of the pens to their Holders, less likely to disappear in pockets!
• One for each workstation in line with LEAN Principles, the right tool exactly where you need it
• Coloured for easy identification

What colours does the Workstation Magnetic Pen Holder come in?

Red, Blue, Yellow, Green

Purchase as Singles, 3-pack, 6-pack, 12-pack

Purchase as a 4 colour pack in pack of 4, and pack of 12 (3 of each colour)

Options:

• Pen Holder including Magnet – you supply your own pens
• Complete with Artline 70 Permanent Marker Black and our own Busy Bee stylus Pen

How can I purchase?

Buy as Singles, or in quantities of 3 units, 6 units, 12 units.  Or purchase in packs of 4 with one of each colour in multiple packs of single (4 pen holders), or 3-pack (12 pen holders).

Why choose BB Engineering Plastics as your Plastic Supplier?

With 25+ years’ experience in the supply of engineering plastic sheet and rod, Busy Bee is proud of our ability to source and supply small batch quantities quickly and efficiently to the Australian market. So, if you are looking for cut to size engineering solid plastic rod supplier, Busy Bee is your one stop shop.

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

Essential for cleaning your Wood Fired Pizza oven floor, or any bakery oven for that matter.  Natural JAVA fibres that can handle the heat. Great alternative to brass or steel brushes that may break down over time and end up in your pizzas!!

Comes in a timber hardwood backing and fitted with a 90 degree metal socket.  All you need to do is add your 25mm dia timber handle and you are ready for cleaning.

Pair with our heavy duty Metal Dustpan and coco fibre banister brush. Click here.

Dimensions:

Length: 460mm

Width: 70mm

Overall backing and bristle height: 100mm

Brush head only.  Supplying the timber handle just adds to the freight, when you can readily source this from your local hardware store.

Directions for use:

Use a metal scraper or rake to push the hot coals away from the area to be cleaned. Then use the oven brush to remove the fine dust or grit.  Easy to do when the pizza oven is cold, best to use the other tools to preserve the backing of the brush.  It is important to check your brush head regularly and replace when the bristles are starting to wear.

Brush head manufactured in Australia by Geelong Brush Company, fitted at our factory in Melbourne.  Support local manufacturing.

Need help with your application?  Please Contact Us and our friendly team will be happy to help.

What is a Condensor Tube Brush?

A Condensor Tube Brush is a twisted in wire brush used for cleaning pipes, tubes, and bottles. Our Condensor Tube Brushes are great for general cleaning and removal of rust and scale from thin section tubing and access to small, hard to reach blind areas.

Attributes:

• Made from Steel wire
• Single twist on sizes 6mm – 13mm, double twist on the larger sizes
• 85mm-120mm brush head length, overall length 210mm
• Threaded End with 5/16 inch BSW Ferrule for greater strength
• Suitable for manual use, slow revolution drill, or other flexible shaft equipment

Choosing the right brush?

Generally, it is best to match the brush to your application.  Condenser Tube brushes are less aggressive than it’s Boiler Tube Brush counterpart and can be used on most surfaces.

The Brass Condenser Tube brush are softer than Steel or Stainless Steel wires and is less likely to scratch harder metals.  Ideal for brass or copper surfaces and is non-sparking.  We also have a range of steel and nylon tube brushes, plus we can custom manufacture a brush to suit your needs. Small production runs are our specialty. Please contact us to discuss your particular application.

Available sizes:

Single Twist

• 13mm diameter – 5/16 inch BSW Ferrule
• 14mm diameter – 5/16 inch BSW Ferrule

Double Twist

• 25mm diameter – 5/16 inch BSW Ferrule
• 32mm diameter – 5/16 inch BSW Ferrule

Spend $100 on our Tube Brush Range to get 10% discount off your Purchase (exc freight).

Enter the code TUBEBRUSH in your Shopping Cart

For larger pipes Click Here for our full range of Wire brushes

Need a different size? CONTACT US to discuss your options. Minimum quantity requirements may apply.

GARAGE DOOR STRIP BRUSH – TOP AND SIDE SEALS

UPDATE – Australian Standards AS 3959-2018 Construction of buildings in bushfire-prone areas – we have confirmed via independent testing our Fire Retardant Strip Brush meets the requirements for homes in BAL rated zones 12.5 up to and including BAL FZ. 

Protect your home from bush fire Ember Attack with our Fire Retardant Garage Brush Seals.  Complies with AS 3959-2018 for BAL – Bush fire attack levels 12.5, 19, 29, 40 and FZ.

Easy to DIY install to or around your Garage Door to seal up gaps to 2mm as per AS 3959-2018 Construction of buildings in bushfire-prone areas.

Suitable to help protect from dust, leaves, draughts, birds and insects.  Helps to keep your garage, home workshop or mancave cooler in summer and warmer in winter.

TOP SEAL

2 options available:

Option A45 – 45 degree Holder – For mounting under the Lintel (or frame), with the bristle just touching the Garage Door when closed.  Can be mounted with the bristle angled upward or downward depending on the movement of your garage door. Suitable for your Roller Door, Sectional or Panel Door.

Option B25 – 25 degree Holder – (SUITABLE FOR GARAGE ROLLER DOORS ONLY) For mounting directly to the outside of the Garage Door.  Fit onto the outer corrugation so that the channel and Brush Strip sits neatly into an inner corrugation.  The Brush Strip rolls up neatly with the Roller Door.  Unfolds when the Roller Door closes and the bristle settles behind the Lintel to create the seal.

SIDE SEAL

For Ember Seal Side Seals we recommend you consider fixing the brush strip to the front of the garage door surround, on the outside of the opening.  The 45 degree Angle Aluminium Holder and 25mm bristle may help reduce the impact of a potential ember attack by acting as a barrier to entry into your garage.  The Roller Door Guides then might protect as a 2nd line of defence. Small particles may be repelled from the Strip Brush Seal fitted to the front of the Garage Door.

Single Garage Kit –

Our Kit covers garage doors up to 3000mm wide and 3000mm wide.

Option S50 – Covers up to a 50mm gap

Option S75 – Covers up to a 75mm gap

Top Seal Contains:

• 2 x 1500mm Anodized Aluminium Holder with 45-degree or 25-degree profile
• 2 x 1500mm Fire Retardant Strip Brush in 4mm ZincSeal backing with 50mm, or 75mm Nylon bristle length
• Fixings – 10 x Steel Screws

Side Seals Contains:

• 4 x 1500mm Anodized Aluminium Holder with 45-degree profile
• 4 x 1500mm Nylon66 Strip Brush in 4mm ZincSeal backing with 25mm Bristle Length
• Fixings – 20 x Masonry Screws

Double Garage Kit –

Our Kit covers garage doors up to 6000mm wide and 3000mm wide.

Option D50 – Covers up to a 50mm gap

Option D75 – Covers up to a 75mm gap

Top Seals Contains:

• 4 x 1500mm Anodized Aluminium Holder with 45-degree or 25-degree profile
• 4 x 1500mm Fire Retardant Strip Brush in 4mm ZincSeal backing with 50mm or 75mm bristle length
• Fixings – 20 x Steel Screws

Side Seals Contains:

• 4 x 1500mm Anodized Aluminium Holder with 45-degree profile
• 4 x 1500mm Fire Retardant Strip Brush in 4mm ZincSeal backing with 25mm Bristle Length
• Fixings – 20 x Masonry Screws

NB. FOR GAPS LARGER THAN 75mm WE RECOMMEND OUR 9MM INDUSTRIAL STRIP BRUSH OPTIONS.  You may also need to consult with your local Garage Door Service professional who may be able to adjust the door to reduce the size of the gap.

• Designed and made in Australia, and has the seal of the Australian Made Campaign licence
• Larger 4mm backing thickness which provides a fuller and dense coverage
• Easy to install to your Garage Door to stop dust, leaves and insects flying in over the top of the Roller Door
• Anodized Aluminium Holders can be painted with an Etch Primer and Colorbond colours to match your Garage Door
• Can be mounted using Steel Screws or Rivets, and Masonry Screws for mounting Side Seals to brickwork
• If there are corrugations in your Roller Door, the bristle needs to touch the outer corrugation of the door to create the seal
• Check that the brush mounting will not impact the mechanism of the Garage Door
• If unsure, talk to your local Garage Door maintenance professional, or your Building Construction Consultant
• Heavy duty packaging to handle shipping to all parts of Australia

See our other product listings. We have Kits available for Sectional and Panel Lift Doors (Type “Sectional” in our Search Box), or you can mix and match with our “Choose your options” product listing (type “4mm” in our Search Box). Sample Kits are available to purchase so you can “try before you buy”

We have a full range of Aluminium Holders and Nylon66 Brush Strips suitable for most domestic Garage doors, including Roller Doors, Panel Doors, Tilt Doors and Sectional Doors.  Suitable for top and bottom seal, and side seals.

Also available in 9mm backing thickness for larger or more Industrial applications.  Refer to our Product Brochure for Brush and Holder sizes.

Not sure which option is best for you?  Please Contact Us and our friendly team will be happy to help.

Australia Post Shipping Is NOT available for lengths above 1 metre. Australia-Wide Flat Rate shipping available.

Please supply a physical address and contact number as our couriers cannot deliver to a PO Box.   Please also specify any special instructions for our Courier, eg. leave at side door if not at home.  Thank you.